Previous

Index

Next

6.4 Recover

Use this routine to recover deeply discharged batteries.

Memo: Some routines will not proceed when the battery voltage is below limits for the battery type and number of cells. This routine can be used to apply the specified “Charge Current” to the battery regardless of initial terminal voltage. This could be used to recover a dead battery for evaluation purposes. This routine is not battery type specific and will automatically terminate after 5 minutes for safety. Specify a “High Voltage Cutoff”(Pass) or “Max Charge Time”(fail) to terminate earlier. At this point, the other regular routines could then be used if the battery voltage rises within bounds.